SUGGESTED USE
Using AulBac ANA 200 regularly will increase overall plant efficiency and reduce sludge production.FOR YOUR PROTECTION, WEAR SAFETY GLASSES, RUBBER GLOVES AND PROPER PROTECTION ATTIRE WHEN USING AulBac ANA 200. REFER TO MATERIAL SAFETY DATA SHEET FOR SPECIFIC INFORMATION. DO NOT USE WHERE THERE ARE HIGH LEVELS OF TOXIC METALS SUCH AS CHROME, MERCURY AND ZINC.
DIRECTIONS
AulBac ANA 200 may be added directly to lagoon, aeration tank or oxidation ditch. For filters, pre-hydrate product by adding 2 lbs. per 1 gallon of 20 – 30 C non-chlorinated water. Let solution stand for a 1/2 hour to 2 hours before adding to trickling filter.
SPECIFICATIONS
Specific Gravity: 0.5 - 0.6
pH: 6 – 8.5
APPEARANCE
Dry, light brown powder
|
AulBac ANA 200 is a specially formulated blend designed to reduce foaming and improve sludge density and settling. It is highly effective in wastewater treatment systems that receive high levels of fats and greases. The bacteria in AulBac ANA 200 have a higher kinetic rate than most indigenous bacterial populations. The bacterium converts a higher percentage of the available BOD into energy and carbon dioxide than most protein matter causing reduced sludge production.
