Misc.

LPM Mold Clean

Availability

LPM Mold Clean is available in one gallon jugs, five gallon pails, 15 gallon drums, 55 gallon drums and 275 gallon totes.

Features

LPM Mold Clean is a water-based, non-flammable, non-aerosol mold cleaner formulated specifically for the plastic molding industry. With typical mold cleaners, the residue from molded plastic and the mold release agent is removed successfully. However, most cleaners are prone to leaving a residue on the mold which damages the mold and its ability to function. LPM Mold Clean is guaranteed to remove all residue from the mold without compromising the mold whatsoever. Additionally, LPM Mold Clean is a non-aerosol, water-based solution that is biodegradable making it safe for your employees and the environment.

Suggested Use

LPM Mold Clean quickly removes lubricating oils, mold release agents and plastic residue from molds for the plastic molding industry.

Directions

Spray on LPM Mold Clean and wipe off with clean towel. This will remove all impurities leaving the surface clean and residue free. Do not dilute LPM Mold Clean. For you protection, wear safety glasses, rubber gloves and apron when using LPM Mold Clean. Do not allow the product to dry on surface or freeze. Please take precautions and use the recommendations in the Material Safety Data Sheet.

EZ-Clean GI

Availability

EZ-Clean GI is available in five gallon pails, 15 gallon drums, 55 gallon drums and 275 gallon totes.

Features

EZ-Clean GI is a water-based, super-concentrated cleaner / degreaser that is biodegradable and non-flammable. Designed to remove dirt, oils and greases from surfaces such as floor, machinery, stamping dyes, plastics and rubber, EZ-Clean GI is strong enough to tackle the toughest of soils without harming the actual floor or machinery surface. With a pH of over 13.5, its ingredients cling to surfaces and begin emulsifying soils on contact causing the soil to become part of the solution. It also contains agents that prevent the soil from redepositing on the surface while cleaning.

Suggested Use

EZ-Clean GI quickly removes lubricating oils and greases from affected surfaces. For your protection, wear safety glasses when using EZ-Clean GI. Do not allow the product to dry on surfaces or to freeze. Please take precautions and use the recommendations in the Material Safety Data Sheet.

Directions

  • Moping: EZ-Clean GI can be diluted 10:1 with water when mopping.
  • Heavy Equipment and Machinery (full strength - 4:1, depending on the soiled area): Spray on and let stand or agitate for one to two minutes then wash off.
  • Concrete Floors (full strength - 8:1, depending on soiled area): Spray on, agitate with brush or mop and rinse.
  • Rubber and Plastic (dilute 10:1 or stronger, depending on the soiled area): Spray on, agitate with brush and rinse.
  • Hot Water Pressure Washers (full strength - 20:1 depending on soiled area): Spray EZ-Clean GI on equipment and spray off with steam pressure washer.

 

Heavy Hitter

Availability

Heavy Hitter is available in 12-one quart cases, five gallon pails, 15 gallon drums, 55 gallon drums and 275 gallon totes.

Features

Heavy Hitter is a non-hazardous, water-based cleaner / degreaser that is biodegradable and non-flammable. Designed to remove lubricating oils and greases from surfaces such as floors, machinery, stamping dyes, plastics and rubber, Heavy Hitter is strong enough to tackle the toughest of soils without harming the actual floor or machinery surface. Its ingredients cling to surfaces and begin emulsifying soils on contact causing the soil to become part of the solution. It also contains agents that prevent soil from redepositing on the surface while cleaning.

Suggested Use

For your protection, wear safety glasses when using Heavy Hitter. Do not allow the product to dry on surfaces or to freeze. Please take precautions and use the recommendations in the Material Safety Data Sheet.

Directions

  • Moping: Heavy Hitter can be diluted 8:1 with water when mopping.
  • Heavy Equipment and Machinery (full strength - 4:1, depending on the soiled area): Spray on and let stand for one to two minutes then wash off.
  • Concrete Floors (full strength - 8:1, depending on soiled area): Spray on, agitate with brush or mop and rinse.
  • Rubber and Plastic (dilute 10:1 or stronger, depending on the soiled area): Spray on, agitate with brush and rinse.
  • Hot Water Pressure Washers (full strength - 20:1 depending on soiled area): Spray Heavy Hitter on the equipment and spray off with steam pressure washer.

 

FC-811

Availability

FC-811 is available in five gallon pails, 55 gallon drums and 330 gallon totes.

Features

FC-811 is a biodegradable, water-based floor cleaner that is non-flammable, non-corrosive and non-butyl. FC-811 was designed to effectively remove tire marks, lubricating oils and grease from concrete floors without removing painted strips. Its ingredients cling to surfaces and begin emulsifying soils on contact causing the soil to become part of the solution. It also contains agents that prevent the soil from redepositing on the surface while cleaning. Additionally, FC-811 has been specially formulated to avoid the clogging of spray nozzles in floor scrubbing machines, which can often be a major problem in the performance of floor scrubbers.

Suggested Use

FC-811 is best suited for use with mops or in floor scrubbers. For your protection, wear safety glasses and rubber gloves when using FC-811. Do not allow the product to dry on surface or freeze. Please take precautions and use the recommendations in the Material Safety Data Sheet.

Directions

  • Floors: Use eight parts water to one part FC-811.
  • (Dilutions may vary, depending on soils and cleaning frequency)

 

Citra-Sweet

Availability

Citra-Sweet is available in one gallon jugs, five gallon pails, 15 gallon drums, 55 gallon drums and 275 gallon totes.

Features

Citra-Sweet is a non-hazardous, biodegradable, water-based, citrus cleaner / degreaser designed to remove lubricating oils, dirt and grease from surfaces such as floors, machinery, stamping dyes, plastics and rubber. Citra-Sweet contains ingredients that begin emulsifying soils on contact causing the soil to become part of the cleaner as well as agents which prevent the soil from redepositing on the surface while cleaning. Additionally, Citra-Sweet contains a corrosion inhibitor that keeps the cleaner from attacking surfaces while cleaning.

Suggested Use

Citra-Sweet quickly removes lubricating oils and greases from affected surfaces. For your protection, wear safety glasses when using Citra-Sweet. Do not allow the product to dry on surface or to freeze. Please take precautions and use the recommendations in the Material Safety Data Sheet.

Directions

  • Citra-Sweet can be diluted 8:1 with water when mopping.
  • Heavy Equipment and Machinery (full strength — 4:1, depending on the soiled area): Spray on and let stand for one to two minutes then wash off.
  • Concrete Floors (full strength — 8:1, depending on soiled area): Spray affected area, agitate with brush or mop and rinse.
  • Rubber and Plastic (dilute — 10:1 or stronger, depending on the soiled area): Spray on, agitate with brush and rinse.
  • Hot Water Pressure Washers (full strength — 20:1, depending on soiled area): Spray Citra-Sweet on equipment and spray off with steam pressure washer

 

Aluminate HF

Availability

Aluminate HF is available in one gallon jugs, five gallon pails, 15 gallon drums, 55 gallon drums and 275 gallon totes.

Features

Aluminate HF is an aluminum and stainless steel cleaner / brightener designed to remove corrosion, road film and exhaust burns. Aluminate HF is able to brighten and clean the most grimy aluminum and stainless steel surfaces encountered by companies in the transportation industry, foundries and metal processing facilities. Aluminate HF is specially formulated to emulsify soil on contact and prevent it from redepositing on the cleaned surface.

Suggested Use

Use Aluminate HF to remove road film and grime, exhaust burns and corrosion from aluminum and stainless steel surfaces. For your protection, wear safety glasses, rubber gloves and proper protective attire when using Aluminate HF. Do not allow product to dry on surface. Do not apply to hot surfaces. Refer to Material Safety Data Sheet for more specific information.

Directions

  • Lightly Soiled Surfaces: Dilute Aluminate HF with up to 55 parts water. Spray on, agitate with brush (if necessary) and rinse.
  • Heavily Corroded Surfaces: Mix one part Aluminate HF with four to six parts water. Do not use a galvanized bucket. Wet surfaced to be cleaned. Apply Aluminate HF solution with a spray or brush. Work from the bottom up and only cover as much of the area as can be sufficiently handled. Leave on the surface for three to five minutes. Agitate with brush if necessary.

*Depending on the amount of corrosion, rewetting the surface may be necessary. Rinse the surface again to avoid streaking.

 

TT-33

Availability

TT-33 is available in five gallon pails, 55 gallon drums and 330 gallon totes.

Features

TT-33 is a concentrated cleaner / degreaser designed to quickly dissolve and remove greases and oils associated with volatile paint and grease components. The concentrated formula is one of the strongest on the market. TT-33 emulsifies oils and greases upon contact and prevents the soil from redepositing on the cleaner surface.

Suggested Use

For your protection, wear safety glasses, rubber gloves and proper safety protection attire when using TT-33. TT-33 is corrosive material. Please take all precautions and use the recommendations on the Material Safety Data Sheet.

Directions

  • Heavy Build-Up: Dilute with water 4:1. Spray on the affected area and rinse with water.
  • TT-33 may be diluted to clean surfaces with light build-up.
  • Before widespread use, test product on inconspicuous spot to test for deleterious effects.
  • For specific application, contact your distributor.

 

Griff-Clean XLT

Availability

Griff-Clean XLT is available in five gallon pails, 15 gallon drums, 55 gallon drums and 275 gallon totes.

Features

Griff-Clean XLT is a new generation, water-based, super-concentrated cleaner / degreaserthat is biodegradable and non-flammable. Designed to remove dirt, oils, greases and charred material from surfaces such as floors, machinery, stamping dyes, plastics and rubber, Griff-Clean XLT is strong enough to tackle the toughest soils without harming the actual floor or machinery surface. With a pH of over 13.5, its ingredients cling to surfaces and begin emulsifying soils on contact causing the soil to become part of the solution. It also contains agents that prevent the soil from redepositing on the surface while cleaning.

Suggested Use

Griff-Clean XLT quickly and effortlessly removes lubricating oils and greases from affected surfaces. For your protection, wear safety glasses when using Griff-Clean XLT. Do not allow the product to dry on surfaces or to freeze. Please take precautions and use the recommendations in the Material Safety Data Sheet.

Directions

  • Moping: Griff-Clean XLT can be diluted 10:1 with water when mopping.
  • Heavy Equipment and Machinery (full strength - 4:1, depending on the soiled area): Spray on and let stand or agitate for one to two minutes then wash off.
  • Concrete Floors (full strength - 8:1, depending on soiled area): Spray on, agitate with brush or mop and rinse.
  • Rubber and Plastic: (dilute 10:1 or stronger, depending on the soiled area): Spray on, agitate with brush and rinse.
  • Hot Water Pressure Washers (full strength - 20:1 depending on soiled area): Spray the Griff-Clean XLT on the equipment and spray off with steam pressure washer.