SUGGESTED USE
LPM Mold Clean quickly removes lubricating oils, mold release agents and plastic residue from molds for the plastic molding industry.
DIRECTIONS
Spray on LPM Mold Clean and wipe off with clean towel or rag. This will remove all impurities leaving the surface clean and residue free. **Do not dilute LPM Mold Clean** FOR YOUR PROTECTION, WEAR SAFETY GLASSES, RUBBER GLOVES AND APRON WHEN USING LPM MOLD CLEAN. NOTE: Do not allow the product to dry on surface. DO NOT ALLOW LPM MOLD CLEAN TO FREEZE. Please take precautions and use the recommendations in the Material Safety Data Sheet.
|
LPM Mold Clean is a water-based, non-flammable, non-aerosol mold cleaner formulated specifically for the plastic molding industry. With typical mold cleaners, the residue from the molded plastic and the mold release agent is removed successfully; however, most cleaner are prone to leaving a residue on the mold which damages the mold and its ability to function. LPM Mold Clean is guaranteed to remove all reside from the mold without compromising the mold whatsoever. Additionally, LPM Mold Clean is a non-aerosol, water-based solution which is biodegradable making it safe for your employees and the environment.
