SUGGESTED USE
Griff-Clean XLT quickly and effortlessly removes lubricating oils and greases from affected surfaces. FOR YOUR PROTECTION, WEAR SAFETY GLASSES WHEN USING Griff-Clean XLT. NOTE: Do not allow the product to dry on surfaces. DO NOT ALLOW Griff-Clean XLT TO FREEZE. Please take precautions and use the recommendations in the Material Safety Data Sheet.
DIRECTIONS
- Moping: Griff-Clean XLT can be diluted 10:1 with water when mopping.
- Heavy Equipment and Machinery: (full strength- 4:1, depending on the soiled area): Spray on and let stand or agitate for 1-2 minutes then wash off.
- Concrete Floors: (full strength- 8:1, depending on soiled area): Spray on, agitate with brush or mop, and rinse.
- Rubber and Plastic: (dilute 10:1 or stronger, depending on the soiled area): Spray on, agitate with brush, and rinse.
- Hot Water Pressure Washers: (Full strength- 20:1 depending on soiled area): Spray the Griff-Clean XLT on the equipment and spray off with steam pressure washer.
|
Griff-Clean XLT is a new generation, water-based, super-concentrated cleaner/degreaser which is biodegradable and non-flammable. Designed to remove dirt, oils, greases and charred material from surfaces such as floors, machinery, stamping dyes, plastics and rubber, Griff-Clean XLT is strong enough to tackle even the toughest of soils without harming the actual floor or machinery surface. With a pH of over 13.5, its ingredients cling to surfaces and begin emulsifying soils on contact causing the soil to become part of the solution. It also contains agents which prevent the soil from redepositing on the surface while cleaning.
