SUGGESTED USE
Kleen Krete quickly removes dirt, grime, petroleum, oils and grease from unpainted concrete floors. FOR YOUR PROTECTION, WEAR SAFETY GLASSES, RUBBER GLOVES AND APRON WHEN USING KLEEN KRETE. NOTE: Spot test Kleen Krete at desired concentration levels in an inconspicuous area to check for damaging effects prior to wide-spread commercial use. Please take precautions and use the recommendations in the Material Safety Data Sheet.
DIRECTIONS
Spray water on the concrete surface needed to be cleaned. Apply a thin layer of Kleen Krete to the wet concrete surface. Agitate with brush if heavily soiled. Allow Kleen Krete to work for 5 minutes and wash off with water. Kleen Krete can be used in a mop and bucket for cleaning lightly soiled areas. Mix 1 oz. Kleen Krete to 1 gallon of water. CAUTION: Contains Sodium Metasilicate CAS # 6834-92-0 and Sodium Hydroxide CAS # 1310-73-2
|
Kleen Krete is a specially designed, highly-effective, concentrated white-powder concrete cleaner. Designed to remove dirt, grime, petroleum, oils and grease from concrete floors, Kleen Krete is strong enough to tackle even the toughest of soils without harming the actual concrete surface. Its ingredients cling to surfaces and begin emulsifying soils on contact causing the soil to become part of the cleaner. It also contains agents which prevent the soil from redepositing on the surface while cleaning.
