SUGGESTED USE
Use Aluminate HF to remove road film and grime, exhaust burns and corrosion from aluminum and stainless steel surfaces. FOR YOUR PROTECTION, WEAR SAFETY GLASSES, RUBBER GLOVES, AND PROPER PROTECTION ATTIRE WHEN USING ALUMINATE HF. NOTE: DO NOT ALLOW PRODUCT TO DRY ON SURFACE. DO NOT APPLY ALUMINATE HF TO HOT SURFACES. REFER TO MATERIAL SAFETY DATA SHEET FOR MORE SPECIFIC INFORMATION.
DIRECTIONS
- Lightly Soiled Surfaces: Dilute Aluminate HF with up to 55 parts water. Spray on, agitate with brush (if necessary) and rinse.
- Heavily Corroded Surfaces: Mix 1 part Aluminate HF with 4-6 parts water. Do not use galvanized bucket. Wet surfaced to be cleaned. Apply Aluminate HF solution with a spray or brush. Work from the bottom up and only cover as much of the area as can be sufficiently handled. Leave on the surface for 3-5 minutes. Agitate with brush if necessary.
*Depending on the amount of corrosion, rewetting the surface may be necessary. Rinse the surface again to avoid streaking.
|
Aluminate HF is an aluminum and stainless steel cleaner/brightener designed to remove corrosion, road film and exhaust burns. Aluminate HF is able to brighten and clean the most grimy aluminum and stainless steel surfaces encountered by companies in the transportation industry, foundries and metal processing facilities. Aluminate HF is specially formulated to emulsify soil on contact and prevent it from redepositing on the cleaned surface.
